? coilcraft, inc. 2010 specifications subject to change without notice. please check our website for latest information. rohs halogen free shielded power inductor C xfl3010 document 727-1 document 727-1 revised 06/28/10 inductance 2 dcr (mohms) 3 srf typ 4 i sat (a) 5 i rms (a) 5 part number 1 20% (h) nom max (mhz) 10% drop 20% drop 30% drop 20c rise 40c rise xfl3010-601me_ 0.60 30 33 180 1.8 2.4 2.7 1.8 2.5 xfl3010-102me_ 1.0 43 49 128 1.5 2.1 2.4 1.6 2.3 xfl3010-152me_ 1.5 71 80 97 1.2 1.6 1.9 1.4 1.9 xfl3010-222me_ 2.2 111 122 78 0.94 1.2 1.5 1.0 1.3 xfl3010-332me_ 3.3 154 166 64 0.86 1.1 1.3 0.88 1.2 xfl3010-472me_ 4.7 217 230 57 0.71 0.97 1.1 0.84 1.1 designer?s kit c440 contains 5 of each xfl3010 and xfl3012 value core material composite environmental rohs compliant, halogen free terminations rohs compliant tin-silver-copper over tin over nickel over silver. other terminations available at additional cost. weight 44 mg ambient temperature ?40c to +90c with i rms current, +90c to +130c with derated current storage temperature component: ?40c to +130c. packaging: ?40c to +80c resistance to soldering heat max three 40 second reflows at +260c, parts cooled to room temperature between cycles moisture sensitivity level (msl) 1 (unlimited floor life at <30c / 85% relative humidity) failures in time (fit) / mean time between failures (mtbf) 38 per billion hours / 26,315,789 hours, calculated per telcordia sr-332 packaging 2000/7 reel; 7500/13 reel plastic tape: 8 mm wide, 0.23 mm thick, 4 mm pocket spacing, 1.14 mm pocket depth pcb washing only pure water or alcohol recommended ? high current, magnetically shielded power inductors ? only 1 mm high with a 3 mm 3 mm footprint 1. when ordering, please specify packaging code: xfl3010-222me c packaging: c =7 machine-ready reel. eia-481 embossed plastic tape (2000 parts per full reel). b = less than full reel. in tape, but not machine ready. to have a leader and trailer added ($25 charge), use code letter c instead. d =13 machine-ready reel. eia-481 embossed plastic tape. factory order only, not stocked (7500 parts per full reel). 2. inductance tested at 100 khz, 0.1 vrms, 0 adc. 3. dcr measured on a micro-ohmmeter. 4. srf measured using agilent/hp 4395a or equivalent. 5. dc current at which the inductance drops the specified amount from its value without current. 6. current that causes the specified temperature rise from 25c ambient. 7. electrical specifications at 25c. refer to doc 362 ?soldering surface mount components? before soldering.
? coilcraft, inc. 2010 specifications subject to change without notice. please check our website for latest information. rohs halogen free smt power inductor C xfl3010 document 727-2 document 727-2 revised 06/28/10 l vscurrent l vs frequency dimensions are in inches mm typical irms derating 0.118 0.008 3,0 0,2 0.118 0.008 3,0 0,2 0.039 0.004 1,0 0,1 min 0.082 2,08 0.126 3,2 0.044 1,12 0.043 1,1 recommended land pattern 0.1 1 10 0.01 0.1 10 1 current (a) inductance (h) 0.60 h 1.0 h 1.5 h 2.2 h 3.3 h 4.7 h 0.1 1 10 0.1 1 100 10 frequency (mhz) inductance (h) 0.62 h 2.2 h 3.3 h 1.0 h 1.5 h 4.7 h -40 -20 0 20 40 60 80 100 140 120 ambient temperature (c) 120 110 100 90 80 70 60 50 40 30 20 10 0 25c percent of rated rms i
|
